Highlight:
Hydraulic cylinder seal kits are used to seal the gap between different parts of the hydraulic cylinder. The function of hydraulic cylinder seal kits is to prevent oil leakage, to assure the working pressure of the hydraulic system, to maintain its power.
Boom Cylinder seal kit is, as the name suggests, fitted into the boom cylinder.
There are regularly three cylinders for the excavator, boom cylinder, arm cylinder, bucket cylinder.
More Part No.
| 707-99-67010 |
42N-6C-13330 |
707-01-XU760 |
707-99-45230 |
| 707-99-66240 |
2438U1104F1 |
707-99-69500 |
KOB-2438U1104R200 |
| KOB-2438U1104R500 |
707-99-64540 |
707-99-68510 |
707-99-67870 |
| 707-99-66610 |
707-99-24630 |
KOB-2438U1104R400 |
707-99-65410 |
| 707-99-66630 |
707-99-65410 |
707-99-66610 |
707-99-73020 |
We can also supply you all kinds of Hydraulic seal kits:
1. ADJUSTER SEAL KIT
2. SWING MOTOR SEAL KIT
3. LEVER SEAL KIT / PILOT VALVE SEAL KIT
4. PUMP GASKET
5. TRANSMISSION SEAL KIT
6. BREAKER HAMMER SEAL KIT
Picture Preview:
The correct method of installing the hydraulic sealing ring is as follows:
1. Check the relevant surfaces of the piston, cylinder and installation guide sleeve to ensure that they are fully clean, burr-free and edgeless.
2. The installation tools shall be smooth, edgeless and sharp to ensure that the seals will not be damaged in any form during the installation process.
3. A small amount of grease can be put on the relevant surface of the seals and cylinder to facilitate installation, but the residual grease is not allowed between the rubber elastomer and the sliding seal ring, otherwise it will affect the sealing performance.
4. Whether vertical or horizontal installation should maintain the coaxiality of the piston and cylinder, too much eccentricity is likely to damage the seal.
5. The installation speed should not be too fast, otherwise it will damage the seal.
FAQ
Q1:The website have not find mine model. What should I do?
A:You can give us model number. We will respond quickly.
Q2: Are you trading company or manufacturer?
A:We are trading company and we also have our own factory to produce seals.With more than 20 years of PU manufacturing experience.
Q3: Can you provide samples? Is it free or extra?
A: Yes, we can supply the sample for free. Freight charges can be negotiated.
Q4: How soon i can get the quotation?
A: If your information is complete, we offer our quotation within 24 hours.
Q5: Could you supply solutions to us?
A: Sure we can.
Q6:What’s your main products?
A:Our main products: All kind of oil seal and seal kit for excavator, bulldozer, loader, breaker hammer, crane and so on.
Q7:What can you buy from us?
A:Pump Seals,Combi Seals,Cassette Seals,Pressure Seals,VB Seals.
Your message must be between 20-3,000 characters!
