Highlight:
Final Drive Pinion Oil Seal
, D275A-5D Oil Seal
, O Ring Seals for Heavy Equipment
1. Quick Details of seal 17M-15-45990 :
| Part NO. |
17M-15-45990 |
| Machine |
Crawler Dozer |
| Size |
OEM |
| Material |
Oil seal ,Gasket |
| Oil seal type |
OIL SEAL |
2. 17M-15-45990 parts on group :
| NO. |
PART NO. |
PRAT NAME |
QTY |
| 1 |
17M-15-51031 |
TRANSMISSION ASSEMBLY,-50ЯC |
1 |
| 2 |
17M-15-45804 |
T/M VALVE ASSEMBLY |
1 |
| 3 |
17M-15-45803 |
T/M VALVE ASSEMBLY |
1 |
| 4 |
195-15-75531 |
GASKET (K3) |
1 |
| 5 |
01010-81055 |
BOLT |
2 |
| 6 |
01643-31032 |
WASHER |
2 |
| 7 |
17M-15-45541 |
PLUG |
5 |
| 8 |
07000-72012 |
O-RING (K3) |
5 |
| 9 |
17M-22-47840 |
O-RING (K3) |
5 |
| 10 |
17M-15-45934 |
FILTER ASSEMBLY |
1 |
| 11 |
154-15-65561 |
ELEMENT |
1 |
| 12 |
17M-15-45990 |
O-RING (K3) |
1 |
| 13 |
07000-72014 |
O-RING (K3) |
2 |
| 14 |
01010-81035 |
BOLT |
2 |
| 15 |
01643-31032 |
WASHER |
2 |
| 16 |
195-15-77200 |
HARNESS |
1 |
| 17 |
195-15-75740 |
O-RING (K3) |
1 |
| 18 |
08191-50809 |
WASHER, LOCK |
1 |
| 19 |
08191-50808 |
NUT |
1 |
3. 17M-15-45990 picture:
4. Service part number :
| PART NO. |
PART NO. |
Part NO. |
| 707-35-91660 |
707-44-80180 |
707-98-56210 |
| 707-35-91750 |
707-44-85180 |
707-98-56600 |
| 707-35-91840 |
707-44-10150 |
707-98-56610 |
| 707-35-91850 |
707-44-85150 |
707-98-56640 |
| 707-35-92020 |
707-44-90070 |
707-98-57201 |
| 707-35-92050 |
707-44-90080 |
707-98-58200 |
| 707-35-92300 |
707-44-90180 |
707-98-58210 |
| 707-35-92600 |
707-44-90150 |
707-98-58230 |
| 707-35-92900 |
707-44-95180 |
707-98-58240 |
| 707-35-93020 |
707-44-95150 |
707-98-60100 |
| 707-35-99500 |
707-44-10080 |
707-98-60110 |
| 707-35-99510 |
707-44-10180 |
707-98-60120 |
| 707-35-99600 |
707-44-10250 |
707-98-60121 |
| 707-51-75640 |
707-44-10280 |
707-44-85150 |
5. FAQ
Q: What material is this red O-ring typically made of?
A: The red color most commonly indicates silicone rubber (VMQ). Depending on the specific application, it may also be a fluorosilicone (FVMQ) or high-temperature nitrile (NBR) variant, but silicone is the standard for red O-rings.
Q: What are the key properties of silicone rubber for this seal?
A: Silicone offers excellent heat resistance (operating range roughly -60°C to +200°C), great flexibility even at low temperatures, and strong resistance to ozone, weathering, and aging. It’s ideal for applications with hot air, steam, or non-polar fluids, though it is not recommended for use with most mineral oils or fuels.
Q: What common issues cause O-ring failure?
A: Common causes include improper installation (twisting, pinching, or overstretching), chemical incompatibility with the fluid, excessive heat or cold leading to hardening or brittleness, surface scratches on mating parts, and using the wrong size or durometer.
Q: How do I install this oil seal correctly?
A: Clean the housing bore and shaft thoroughly, lubricate the seal lip and shaft with compatible oil, align the seal with the bore, and press it evenly using a seal driver until it sits flush, taking care not to damage the lip or tilt the seal.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Your message must be between 20-3,000 characters!
