195-27-00060 1952700060 Excavator Transmission Seal Kit D375AI-8E0 D375A-8

1. Quick Details of  seal 195-27-00060 :

2. 195-27-00060  parts on group :

3. 195-27-00060 picture:

4. Service part number :

 
5. FAQ

Q: What materials make up each component?
A: The large brown gasket is a fiber composite gasket, often made of heat-resistant compressed fiber or paper with a binder (branded with “ThreeBond,” a common high-performance gasket material). The red O-rings are usually made of high-temperature silicone or fluorosilicone rubber.

Q: Why these materials for this kit?
A: The ThreeBond-style composite gasket is designed to withstand heat, pressure, and fluid exposure, while conforming to minor surface irregularities to ensure a tight seal. The silicone/fluorosilicone O-rings offer excellent flexibility, heat resistance, and compatibility with oils and hydraulic fluids, making them ideal for sealing ports and passages in the assembly.

Q: What is the correct installation process?
A: First, thoroughly clean both mating surfaces to remove all old gasket material, oil, and debris. Inspect the surfaces for scratches, warpage, or corrosion that could compromise the seal. Place the composite gasket onto the assembly, aligning it with all bolt holes and passages. Fit each O-ring into its designated groove, ensuring they are not twisted or overstretched. Torque the bolts to the manufacturer’s specifications in the recommended sequence to distribute pressure evenly across the gasket.

Q: How long can these parts last if installed correctly?

A: With proper installation, clean lubricant, and correct clearance settings, the oil seal can last 5,000–10,000 operating hours, while the metal shims will typically last the life of the assembly unless they are damaged during service.

Q: Can I reuse the old shims?

A: While the shims themselves don’t wear out, it’s best to use new ones if possible, especially if they are bent, scratched, or have been deformed during disassembly. Reusing old shims can lead to incorrect clearances if they are damaged, so always inspect them carefully before reuse. The oil seal, however, should always be replaced with a new one during service.

6. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More