07010-00080 0701000080 HNBR PU FKM Graphite PTFE Multi-Material Composite Oil Seal Kit for Bulldozer Main Hydraulic Gear Pump Maintenance GD30-4 D50P-10

1. Quick Details of  seal 07010-00080:

2. 07010-00080  parts on group :

3. 07010-00080  picture:

4. Service part number :

5. FAQ

Q: What distinct color and structural features allow maintenance technicians to quickly distinguish each component inside this main gear pump seal kit?
A: HNBR rotary shaft and pump piston main seals are matte deep black with dual-lip rotary sealing structure, the contact lip surface adopts ultra-fine mirror polishing without burrs or micro scratches. Oval PU buffer rings are light beige yellow with exclusive oval shock absorption outline, visually distinguishable from arc buffer rings used on various hydraulic valves. FKM static O-rings are dark reddish brown with uniform circular cross-section, no shrinkage or permanent deformation after long-term storage. Graphite-filled PTFE anti-extrusion rings are light gray with evenly distributed fine graphite powder on the surface, easy to tell apart from off-white carbon-filled PTFE rings for hydraulic cylinders. The heavy-duty dust wiper ring is thick black with double-layer internal and external scraping lips, used to block large mud clumps and tiny abrasive dust particles from entering pump shaft gaps. Each accessory is printed with clear main gear pump matching size marks on the surface for fast sorting and matching during on-site assembly.

Q: What wide temperature range and extreme hydraulic pressure working conditions can this four-material composite seal kit sustain for long-term stable operation?
A: This integrated oil seal kit can continuously bear stable long-term working pressure up to 460 bar, and withstand instantaneous peak impact pressure up to 520 bar without extrusion failure of sealing components. HNBR and PU accessories retain stable elasticity and sealing performance within -38°C ~ +122°C, fully adapting to low-temperature frozen mountain construction in winter. FKM O-rings can operate normally within -26°C ~ +148°C, perfectly matching the ultra-high-temperature hydraulic oil circulation state of continuous full-load earthmoving in summer. Graphite-filled PTFE backup rings will not soften or deform under long-term high-speed rotary friction and high temperature, maintaining consistent anti-leakage protection performance all year round.

Q: What hidden mechanical faults and corresponding economic losses will customers encounter if they select low-quality inferior seal kits instead of this complete multi-material set?
A: Cheap inferior seal kits only adopt recycled ordinary NBR raw materials, without matching oval PU buffer rings and graphite-filled PTFE anti-extrusion protective layers. After short-term high-speed rotary friction and mud corrosion, the rotary shaft sealing lip will crack and wear rapidly, triggering internal hydraulic oil bypass and external oil leakage of the main gear pump assembly. The bulldozer will show insufficient overall hydraulic power, slow response of all hydraulic actions, abnormal high-frequency metal squeaking noise and obvious hydraulic vibration during operation. Worn rubber and plastic debris will scratch the precise polished rotary shaft and pump housing inner wall, requiring expensive replacement of integral metal gear pump core components. Meanwhile, continuous oil leakage increases daily hydraulic oil consumption, and long-term equipment shutdown will delay overall construction progress, bringing extra labor cost and operation loss for customers.

Q: What detailed standardized installation operation specifications and forbidden operations should maintenance staff strictly follow to maximize the service life of this 07010-00080 main gear pump seal kit?
A: First, use ultra-fine water sandpaper to polish the rotary shaft outer surface, pump housing inner hole and static sealing mounting surfaces, thoroughly remove old seal residues, metal burrs, mud and fine sand mixed abrasive impurities. Second, evenly coat all sealing components with brand-new clean anti-wear hydraulic oil for lubrication; thick grease mixed with metal iron filings is strictly forbidden, as hard micro particles will scratch the HNBR rotary sealing lip during high-speed rotation. Third, install every rotary shaft seal in the designated direction: the sharp sealing lip must face the high-pressure hydraulic oil chamber side, reverse installation will directly cause continuous oil leakage after assembly. Fourth, lay the graphite-filled PTFE backup ring flat without bending or warping before installing the main HNBR rotary shaft seal. Fifth, after finishing all seal assembly, manually rotate the pump shaft hundreds of times at low pressure to check all sealing positions for oil leakage before installing the main gear pump back on the bulldozer and putting the machine into full-load earthmoving operation.

6. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More