07010-00090 0701000090 HNBR PU FKM Graphite PTFE Multi-Material Composite Oil Seal Kit for Bulldozer Charge Pump Servicing GD30-4 GD30-5M

1. Quick Details of  seal 07010-00090:

2. 07010-00090  parts on group :

3. 07010-00090  picture:

4. Service part number :

5. FAQ

Q: What clear color and structural differences allow maintenance technicians to quickly identify each component inside this charge pump seal kit?
A: HNBR rotary shaft and internal piston main seals are matte jet black with dual-lip rotary sealing structure, the contact lip surface undergoes precision nano mirror polishing without burrs or micro abrasion scratches. Concave circular PU buffer rings are pale apricot yellow with exclusive inward concave shock absorption outline, visually distinguishable from oval and arc buffer rings used on main gear pumps and hydraulic valves. FKM static O-rings are dark maroon brown with consistent uniform circular cross-section, no shrinkage or permanent deformation after long-term warehouse storage. Graphite-infused PTFE anti-extrusion rings are light ash gray with evenly scattered fine graphite powder across the surface, easy to separate from off-white carbon-filled PTFE rings used on main hydraulic cylinders. The lightweight dust wiper ring is thin black with single micro scraping lip, dedicated to blocking ultra-fine silt particles from entering narrow pump shaft gaps. Each accessory is printed with clear charge pump matching dimension marks on the surface for rapid sorting and matching during on-site assembly.

Q: What wide temperature range and varying hydraulic pressure working conditions can this four-material composite seal kit sustain for long-term stable continuous operation?
A: This integrated oil seal kit can steadily bear sustained long-term working pressure up to 465 bar, and withstand instantaneous peak impact pressure up to 525 bar without extrusion failure of delicate sealing components. HNBR and PU components retain stable elastic recovery and sealing performance within -38°C ~ +122°C, fully adapting to sub-zero frozen mountain construction in winter. FKM O-rings can operate reliably within -26°C ~ +148°C, perfectly matching the ultra-high-temperature hydraulic oil circulation state of non-stop full-load earthmoving in summer. Graphite-infused PTFE backup rings will not soften or deform under medium-speed rotary friction and persistent high temperature, maintaining consistent anti-leakage protective performance through all seasonal working environments.

Q: What hidden hydraulic system malfunctions and corresponding financial losses will customers face if they select low-grade inferior seal kits instead of this complete multi-material composite set?
A: Cheap inferior seal kits only utilize recycled low-grade NBR raw materials, without matching concave circular PU buffer rings and graphite-infused PTFE anti-extrusion protective layers. After short-duration medium-speed rotary friction and silt corrosion, the thin rotary shaft sealing lip will crack and wear rapidly, triggering internal hydraulic oil bypass and slow external oil seepage of the auxiliary charge pump assembly. The bulldozer will exhibit delayed brake response, stiff pilot handle operation, insufficient torque converter power supply and obvious low-frequency hydraulic humming vibration noise during driving. Worn rubber and plastic debris will scratch the precision polished rotary shaft and pump housing inner bore, requiring costly full replacement of integral metal charge pump core components. Meanwhile, persistent slow oil seepage increases daily hydraulic oil consumption costs, and prolonged equipment shutdown will delay overall construction project schedules, bringing extra labor rental and operation loss expenses for customers.

Q: What detailed standardized installation operation specifications and prohibited operations should maintenance staff strictly follow to extend the maximum service life of this 07010-00090 charge pump seal kit?
A: First, use ultra-fine micron water sandpaper to polish the rotary shaft outer surface, pump housing inner bore and static sealing mounting flat surfaces, thoroughly clear old seal residues, metal micro burrs, mud and fine silt mixed abrasive impurities. Second, evenly coat all delicate sealing components with brand-new clean anti-wear hydraulic oil for lubrication; thick grease mixed with metal iron filings is strictly forbidden, as hard micro particles will scratch the HNBR dual-lip rotary sealing lip during medium-speed rotation. Third, install every rotary shaft seal in the designated orientation: the sharp sealing lip must face the internal high-pressure hydraulic oil chamber side, reversed installation will directly cause continuous slow oil seepage after assembly completion. Fourth, lay the graphite-infused PTFE backup ring completely flat without bending or warping before fitting the main HNBR rotary shaft seal into position. Fifth, after finishing full seal assembly, manually rotate the charge pump shaft hundreds of cycles at low pre-charge pressure to inspect all sealing positions for oil seepage before reinstalling the auxiliary charge pump onto the bulldozer and putting the machine back into full-load earthmoving production.

6. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More