07010-01068 0701001068 HNBR PU FKM Carbon Filled PTFE Multi-Material Composite Oil Seal Kit for Bulldozer Ripper Tilt Cylinder Complete Overhaul Servicing

1. Quick Details of  seal 07010-01068:

2. 07010-01068  picture:

3. Service part number :

4. FAQ

Q: What clear color and structural visual differences allow maintenance technicians to quickly identify each heavy-duty component inside this ripper tilt cylinder seal kit?
A: HNBR ripper tilt rod and balance piston main seals are matte jet black with wide triple-lip integrated heavy sealing structure, the contact lip surface undergoes precision mirror polishing without burrs or eccentric rock deflection abrasion scratches. Wide rectangular PU load buffer rings are pale apricot yellow with exclusive flat rectangular shock absorption outline, visually distinguishable from trapezoidal, narrow arc and circular PU buffer rings used on ripper lift cylinders, pilot valves and medium-load tilt cylinders. FKM thick static O-rings are dark coffee brown with thick uniform circular cross-section, no shrinkage or permanent deformation after long-term static eccentric heavy-load oil soaking storage. Carbon-filled PTFE wide anti-extrusion rings are off-white with evenly scattered tiny black carbon particles on the flat wide surface, easy to separate from light gray graphite-infused PTFE rings applied to narrow-gap miniature valve assemblies. The heavy-duty dual-layer dust wiper ring is extra-thick black with two layers of internal and external scraping lips; the outer thick lip blocks large rock fragments and mud clods, while the inner fine lip intercepts tiny abrasive silt particles. Each heavy accessory is printed with clear ripper tilt cylinder matching dimension marks on the surface for rapid sorting and matching during on-site heavy cylinder assembly.

Q: What wide temperature range and irregular eccentric ultra-heavy impact hydraulic working conditions can this four-material composite seal kit sustain for long-term stable continuous operation?
A: This integrated oil seal kit can steadily bear sustained long-term eccentric working pressure up to 402 bar, and withstand repeated instantaneous uneven rock deflection eccentric peak impact pressure up to 458 bar without extrusion failure of heavy-duty sealing components. HNBR and PU components retain stable elastic recovery and impact-resistant sealing performance within -38°C ~ +122°C, fully adapting to sub-zero frozen mountain uneven rock excavation in winter and high-temperature continuous all-day scarifying in summer. FKM thick O-rings can operate reliably within -26°C ~ +145°C, perfectly matching the ultra-high-temperature heavy-load hydraulic oil circulation state of non-stop mine stripping construction. Carbon-filled PTFE wide backup rings will not soften or deform under thousands of eccentric reciprocating deflection friction and persistent high static temperature, maintaining consistent anti-leakage protective performance through all seasonal construction environments.

Q: What hidden heavy-load mechanical faults and corresponding financial losses will customers face if they select low-grade inferior seal kits instead of this complete multi-material composite set?
A: Cheap inferior seal kits only utilize recycled low-grade ordinary NBR raw materials, without matching wide rectangular PU irregular rock impact buffer rings and carbon-filled PTFE wide anti-extrusion protective layers. After thousands of eccentric uneven rock impact cycles and long-term mud-rock mixed corrosion, the wide triple-lip piston sealing lip will fatigue and tear rapidly, triggering internal hydraulic oil bypass and continuous external oil leakage of the ripper tilt cylinder. The bulldozer ripper will exhibit unbalanced left-right deflection angle, automatic ripper tooth side drift after shutdown, insufficient lateral rock breaking penetration force and obvious hydraulic jitter impact noise when hitting inclined hard rock layers. Worn large rubber and plastic debris will scratch the polished tilt rod and cylinder barrel inner wall, requiring expensive full replacement of integral metal cylinder core components. Meanwhile, frequent oil leakage increases daily hydraulic oil consumption costs, and prolonged equipment shutdown will delay overall mine and mountain construction project schedules, bringing extra labor rental and operation loss expenses for customers.

5. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More