Highlight:
1. Quick Details of seal 707-77-16010 :
| Part NO. |
707-77-16010 |
| Machine |
Excavator |
| Size |
OEM |
| Material |
High wear-resistant PU Polyurethane |
| Oil seal type |
SERVICE KIT,TORQUECONVERTER |
2. 707-77-16010 parts on group :
| NO. |
PART NO. |
PRAT NAME |
QTY |
| 1 |
21N-63-X2031 |
CYLINDER GROUP |
1 |
| 2 |
21N-63-X2030 |
CYLINDER GROUP |
1 |
| 3 |
21N-63-02031 |
CYLINDER ASSEMBLY |
1 |
| 4 |
21N-63-02030 |
CYLINDER ASSEMBLY |
1 |
| 5 |
21N-63-62140 |
CYLINDER |
1 |
| 6 |
21N-63-62120 |
ROD |
1 |
| 7 |
707-46-16040 |
BUSHING |
4 |
| 8 |
707-77-16010 |
SEAL,DUST (KIT) |
4 |
| 9 |
707-46-16030 |
BUSHING |
2 |
| 10 |
01011-83310 |
BOLT |
12 |
| 11 |
07179-15190 |
RING,SNAP |
1 |
| 12 |
707-75-17012 |
RING,SNAP |
1 |
| 13 |
707-56-17510 |
SEAL,DUST (KIT) |
1 |
| 14 |
707-56-17580 |
SEAL,DUST (KIT) |
1 |
| 15 |
707-28-25510 |
HEAD,CYLINDER |
1 |
| 16 |
707-51-17130 |
PACKING,ROD (KIT) |
1 |
| 17 |
707-51-17630 |
RING,BUFFER (KIT) |
1 |
| 18 |
07000-15250 |
O-RING (KIT) |
1 |
| 19 |
707-35-92600 |
RING,BACK-UP (KIT) |
1 |
| 20 |
707-52-11710 |
BUSHING |
1 |
| 21 |
07000-15250 |
O-RING (KIT) |
1 |
| 22 |
07001-05250 |
RING,BACK-UP (KIT) |
1 |
| 23 |
707-71-31850 |
COLLAR |
1 |
| 24 |
707-71-11850 |
RING |
1 |
| 25 |
707-71-51852 |
PLUNGER |
1 |
| 26 |
707-71-51851 |
PLUNGER |
1 |
| 27 |
707-40-25910 |
RETAINER |
2 |
| 28 |
707-91-02521 |
PISTON SUB ASSEMBLY |
1 |
| 29 |
707-91-02520 |
PISTON SUB ASSEMBLY |
1 |
| 30 |
04260-01270 |
BALL |
10 |
| 31 |
707-71-91390 |
PIN |
1 |
| 32 |
707-71-50400 |
PLUNGER |
1 |
| 33 |
07043-00108 |
PLUG |
2 |
| 34 |
707-39-25820 |
RING,WEAR (KIT) |
4 |
| 35 |
07000-15145 |
O-RING (KIT) |
1 |
| 36 |
707-35-91550 |
RING,BACK-UP (KIT) |
2 |
| 37 |
707-44-25180 |
RING,PISTON (KIT) |
1 |
| 38 |
707-44-25080 |
RING,PISTON (KIT) |
1 |
| 39 |
707-40-25970 |
SPACER |
2 |
| 40 |
01253-31810 |
BOLT |
6 |
| 41 |
707-37-25020 |
PISTON |
1 |
| 42 |
21N-62-18350 |
TUBE |
1 |
| 43 |
01010-51240 |
BOLT |
8 |
| 44 |
01643-31232 |
WASHER |
8 |
| 45 |
21N-62-18430 |
BAND |
2 |
| 46 |
21N-62-18410 |
BRACKET |
2 |
| 47 |
07283-24346 |
CLIP |
2 |
| 48 |
01643-31032 |
WASHER |
4 |
| 49 |
01599-01011 |
NUT |
4 |
| 50 |
07000-13048 |
O-RING (KIT) |
1 |
| 51 |
01010-51450 |
BOLT |
4 |
| 52 |
01643-31445 |
WASHER |
4 |
| 53 |
07000-12060 |
O-RING (KIT) |
1 |
| 54 |
01011-51890 |
BOLT |
4 |
| 55 |
01643-31845 |
WASHER |
4 |
| 56 |
01010-51455 |
BOLT |
12 |
| 57 |
01643-31445 |
WASHER |
12 |
| 58 |
07371-51470 |
FLANGE |
6 |
| 59 |
07378-11410 |
HEAD |
3 |
| 60 |
07000-13048 |
O-RING (KIT) |
3 |
| 61 |
21N-62-18450 |
BLOCK |
1 |
| 62 |
707-99-89200 |
SERVICE KIT |
1 |
3. 707-77-16010 picture:
4. Service part number :
| PART NO. |
PART NO. |
Part NO. |
| 707-98-54500 |
707-98-54500 |
707-99-43540 |
| 707-98-25760 |
707-98-36560 |
707-98-54500 |
| 707-99-67830 |
707-99-75600 |
707-99-46620 |
| 707-99-67840 |
707-99-76030 |
707-99-47040 |
| 707-99-67870 |
707-99-76230 |
707-99-47130 |
| 707-99-68420 |
707-99-76260 |
707-99-47570 |
| 707-99-68430 |
707-99-76300 |
707-99-47600 |
| 707-99-68470 |
707-99-77050 |
707-99-47610 |
| 707-99-68510 |
707-99-77090 |
707-99-47660 |
| 707-99-68560 |
707-99-77120 |
707-99-47670 |
| 707-98-26600 |
707-98-38551 |
707-98-64420 |
| 707-98-26200 |
707-98-37580 |
707-98-60110 |
| 707-98-26300 |
707-98-37600 |
707-98-60120 |
| 707-98-26441 |
707-98-37610 |
707-98-60121 |
| 707-98-26450 |
707-98-37620 |
707-98-61100 |
5. FAQ
Q: Which Komatsu equipment does this 707-77-16010 dust wiper seal fit, and what core function does this heavy-duty dust wiper undertake on the machine?
A: This heavy metal skeleton dust wiper seal is specially matched for Komatsu PC1250-11 large crawler excavator boom, arm and bucket hydraulic cylinders. It is installed at the front end of the cylinder rod gland, the outermost first barrier of the whole hydraulic sealing system. When the piston rod stretches back and forth for rock breaking and heavy earthmoving, the sharp PU scraper lip tightly fits the rod surface to scrape off hard rock fragments, thick sticky mud, gravel and sediment adhered to the rod surface, completely blocking external abrasive particles from invading the internal oil seal assembly, avoiding premature wear and oil leakage of rod seals, piston seals and buffer rings. It is a dedicated heavy-duty dust wiper designed for open-pit mine, mountain rock excavation and high-dust harsh working conditions.
Q: What exclusive material and structural advantages does this 707-77-16010 dust wiper seal have compared with ordinary single rubber dust wiper seals?
A: This dust wiper adopts composite metal skeleton + high-hardness wear-resistant PU dual-layer integrated structure, which is completely different from ordinary pure NBR dust rings without support. First, the outer integrated stamped steel skeleton provides strong radial support, it will not deform, shift or fall off under long-term large reciprocating stroke vibration of large excavator cylinders, solving the common problem of loose installation of non-skeleton dust wipers under heavy load. Second, the contact scraper lip uses 95 Shore A high wear-resistant PU material, with ultra-high anti-scuffing performance, can continuously scrape sharp rock debris without lip tearing, and has low compression permanent deformation, long-term tight fit with the piston rod without gap. Third, the inner auxiliary HNBR buffer ring isolates dust and prevents muddy water from penetrating along the gap between skeleton and cylinder housing, with excellent low-temperature flexibility, no hardening and cracking in cold plateau winter construction. Ordinary single NBR dust wipers lack rigid support, are easy to deform under heavy load, have poor wear resistance and short service life, and cannot adapt to the high-dust heavy rock working environment of large mining excavators.
Q: What obvious appearance and structural feature differences allow maintenance staff to quickly distinguish this K-type heavy dust wiper from other common dust wiper styles?
A: This 707-77-16010 belongs to K-type integrated metal skeleton dust wiper, with three obvious identification features. First, the outer ring is wrapped with a one-piece black anti-rust steel skeleton, the overall ring body has high rigidity, cannot be arbitrarily bent and twisted, while J-type, JA-type non-skeleton PU dust wipers are soft and bendable without metal outer frame. Second, the outer scraping lip is a single large-angle sharp scraper edge, thicker lip thickness, specially used for scraping hard rock mud, while DKB, DKBI double-lip dust wipers have two layers of thin lips for light dust municipal machinery. Third, the inner side is equipped with an integrated HNBR auxiliary sealing ring, forming dual dust-proof and water-blocking structure, single-layer PU dust wipers have no auxiliary rubber buffer ring. In color: the outer metal skeleton is matte black anti-rust paint, the outer scraper lip is pale yellow solid PU, the inner auxiliary ring is matte black HNBR rubber, the three-color composite structure is easy to identify on site.
Q: What wide temperature range and harsh high-dust heavy reciprocating working conditions can this composite dust wiper seal withstand for long-term stable service?
A: The PU scraper lip operates stably within -38℃ ~ +110℃, the metal skeleton and HNBR inner ring can adapt to -40℃ ~ +120℃ full-season construction temperature range. It can adapt to continuous reciprocating linear speed up to 1.2m/s of large excavator cylinder rods, resist long-term erosion of rock powder, mine muddy water, sand and gravel mixed dirt, and can work continuously for thousands of hours under open-pit mine all-day heavy rock breaking conditions without scraper lip collapse, skeleton deformation or water seepage. It is specially optimized for large mining excavators with ultra-large cylinder rod diameter and heavy load stroke, and its dust isolation durability is far higher than standard small machine dust wipers.
Q: What hidden hydraulic cylinder failure risks and economic losses will customers face if they replace this original heavy dust wiper with cheap inferior non-skeleton dust seals?
A: Cheap inferior single-layer rubber or thin PU dust wipers have no metal support skeleton, and the scraper lip is made of low-hardness recycled material. After a short period of rock excavation work, the lip will wear flat, lose scraping ability, and rock mud and gravel will enter the cylinder sealing cavity along the piston rod. Hard abrasive particles will scratch the rod surface and the inner lip of the rod oil seal, resulting in rapid hydraulic oil leakage of the boom/arm/bucket cylinder. Consequences include: insufficient digging force, automatic arm sinking after shutdown, frequent replenishment of expensive hydraulic oil, frequent shutdown replacement of rod seals, piston seals and buffer rings, and even scratch the whole piston rod leading to expensive rod repair or replacement. Frequent equipment downtime delays mine mining progress, generates extra labor maintenance costs, and inferior dust wipers need repeated replacement in a short cycle, which increases overall spare parts cost in the long run.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Your message must be between 20-3,000 characters!
