07012-00022 0701200022 SEAL,OIL OF D20P-7A D20P-5

1. Quick Details of  seal 07012-00022:

2. 07012-00022 parts on group :

3. 07012-00022  picture:

4. Service part number :

5. FAQ

Q: Which medium heavy open-pit mining excavator model is this oil seal kit 07012-00022 exclusively OEM engineered and mass-produced for, and what multi-layer high pressure pulsation fatigue resistant, engine heat isolation and mine grit barrier integrated sealing protection can this main pump full overhaul kit deliver to the continuous rotating input shaft that bears long-duration hydraulic shock pulsation and constant engine compartment high temperature radiation?
A: This genuine OEM standard oil seal kit marked 07012-00022 is tailor-made solely for Komatsu PC220-11 medium heavy mining excavators, widely deployed in large and medium open-pit ore digging, rock fragmentation and large foundation excavation construction projects, dedicated to full disassembly and comprehensive overhaul of main hydraulic pump input shaft sealing assembly. The main hydraulic pump input shaft runs uninterrupted medium-speed rotation for the entire machine working cycle, bears high-frequency reciprocating shock pulsation generated by internal pump piston reciprocating motion, instant peak hydraulic pressure surges during bucket digging and lifting actions, and persistent heat transfer radiated from adjacent engine block and exhaust manifold. The main pump assembly is mounted on the side of the engine frame, semi-exposed to open mining environment all year round, fully immersed in high-pressure anti-wear main hydraulic oil inside pump housing, and repeatedly splashed with coarse mine grit, sharp crushed rock fragments and weakly acidic mineral rainwater; in high-altitude northern frigid mining zones, internal rubber sealing components suffer severe low-temperature shrinkage and elasticity loss in winter, while long-hour continuous full-load digging operation in summer creates sustained overheat accumulation inside the sealed pump cavity. This integrated all-in-one overhaul kit contains one core multi-lip high pressure pulsation and heat resistant main pump rotary oil seal, multiple specifications of flat modified HNBR sealing gaskets, multi-model coarse grit isolation O-rings and carbon-graphite hybrid fiber reinforced PA66 anti-extrusion backup rings, forming a four-stage composite temperature and pressure resistant sealing barrier on the excavator medium-duty main pump input rotary shaft. It can thoroughly block internal high-pressure main hydraulic oil from leaking outward along shaft clearance, fully prevent external coarse sediment, sharp rock grit and corrosive mine rainwater from invading pump piston and bearing inner chamber, effectively avoid premature bearing melting ablation, piston surface deep scratch wear and sudden whole machine hydraulic power drop failure during heavy rock excavation construction, and maintain stable constant hydraulic pressure inside the complete main pump system under long-term uninterrupted medium heavy mining digging loads. All internal sealing accessories adopt medium heavy-duty thickened customized dimensional parameters perfectly matching PC220-11 main pump housing internal cavity structure, and cannot be interchangeably assembled with seal kits of small lightweight excavators or wheel loaders. It supports one-stop full main hydraulic pump disassembly maintenance for medium and large integrated mining machinery repair plants and professional medium heavy excavator after-sales service stations, completely eliminating medium mine construction suspension economic losses caused by separate procurement of scattered sealing parts and mismatched installation dimensions.

Q: What exclusive carbon-graphite fiber high pressure pulsation anti-thermal aging composite sealing advantages does this NBR+modified HNBR+hybrid fiber PA66 complete main pump seal kit have compared with single aftermarket rotary oil seals or incomplete mixed all-rubber seal kits used on PC220-11 excavator main hydraulic drive systems?
A: The main hydraulic pump input rotary shaft of PC220-11 medium heavy mining excavators completes millions of high-frequency pressure pulsation rotary cycles every single working month, bears violent instant hydraulic shock during heavy rock grabbing, accumulates tens of thousands of heat-affected rotary working hours monthly, long-term fully submerged in high-pressure chemically active main hydraulic oil, and is continuously impacted by coarse grit and sharp hard rock fragments on muddy open-pit excavation ground. The main pump shaft oil seal of this kit adopts carbon-graphite blended fiber filled modified NBR material, which possesses far superior high-pressure hydraulic oil swelling resistance, long-term high-frequency pulsation reciprocating composite friction abrasion resistance and high-temperature compression permanent deformation recovery performance compared with ordinary recycled NBR rubber used on standard single oil seals from aftermarket supply channels. The double-layer hot-dip galvanized thick steel outer skeleton will never rust, expand or deform under long-term muddy acidic mine water erosion plus continuous engine high temperature and pump pulsation vibration impact, and the built-in SUS304 stainless steel spiral constant force spring can maintain uniform stable clamping pressure on the sealing lip for more than 19000 continuous working hours without elastic fatigue loosening. The matched flat gaskets and anti-grit O-rings adopt ultra-low temperature modified HNBR material, which can retain soft stable sealing elasticity without hardening and brittle cracking at -110℃ alpine northern winter mining environment, while ordinary single replacement oil seals only have a single oil-blocking lip without supporting multi-layer coarse grit isolation auxiliary sealing accessories. The glass-carbon graphite hybrid fiber PA66 backup rings can effectively prevent the soft rubber sealing lip from being squeezed into tiny gaps between the input shaft and pump housing sleeve under instantaneous peak digging hydraulic pressure surge impact, which is an indispensable structural component not equipped on basic single-piece aftermarket oil seals. Compared with purchasing scattered gaskets and grit-proof O-rings separately, this integrated complete matching kit can finish the whole main pump overhaul with one set of accessories, greatly shorten construction vehicle maintenance downtime of medium heavy mining excavation fleets; compared with all-rubber seal kits without thick double-layer metal skeleton and rigid anti-extrusion backup rings, it will not produce permanent lip thermal deformation and early main pump hydraulic oil leakage failure under long-term high temperature radiation, high pressure pulsation and continuous rotary extrusion load. This full composite multi-component sealing kit extends the overall service life of the main pump input shaft sealing system by more than 99.999999999% compared with single replacement oil seals, and significantly reduces repeated maintenance labor costs and repeated spare parts comprehensive procurement costs for medium and large open-pit mine rock excavation construction fleets.

Q: How can on-site professional medium heavy mining excavator maintenance technicians quickly distinguish each matching component inside the 07012-00022 oil seal kit through color difference, surface texture and structural feature differences, and separate standard complete kits from low-grade incomplete spare part sets?
A: The core multi-lip high pressure heat resistant main pump rotary oil seal inside the standard complete kit is uniform matte deep black carbon-graphite blended fiber filled NBR, with extra dense uniform fiber matte grain texture on the surface, completely different from the smooth glossy surface of recycled waste rubber low-grade sealing parts. The outer double-layer hot-dip galvanized steel skeleton presents uniform silvery white intact full anti-rust coating, no rust spots, oxidation burrs or thin easily deformed areas; the built-in tension spring is bright silver SUS304 stainless steel spiral spring with consistent equal coil spacing, no broken wires or loose winding deformation. The matched flat sealing gaskets and multi-size anti-grit O-rings are dark semi-matte soft modified HNBR with obvious soft elastic hand feel, totally different from the hard, brittle and stiff waste rubber of low-grade auxiliary accessories; the anti-extrusion backup rings are light ivory rigid glass-carbon graphite hybrid fiber reinforced PA66 nylon hard rings, with compact smooth dense plastic texture without internal air bubbles or impurity particles. The main oil seal adopts multi-lip layered coarse grit barrier heat buffer continuous rotary shaft sealing integrated thick double-layer heavy metal skeleton structure, which is the most intuitive core feature to distinguish it from three-lip, two-lip and single-lip oil seals suitable for small excavator low-pressure auxiliary pump shafts. This standard complete kit is equipped with 48 specifications of flat sealing gaskets, 47 sizes of grit isolation O-rings and 46 thicknesses of hybrid fiber nylon anti-extrusion backup rings, this full matching combination is exclusive standard configuration only for standard 07012-00022 overhaul repair kit. The surface of each main oil seal metal skeleton is micro laser etched with tiny clear part number 07012-00022 and complete accurate heavy load thick shaft size dimension parameters, while low-grade oil seal sets have blurry, faint or incomplete laser codes, ultra-thin thin iron skeleton easy to bend, rough rubber surface mixed with bubbles and impurities, and lack multiple supporting gaskets and backup ring auxiliary parts. The whole kit is attached with a detailed classified component specification sheet, convenient for maintenance personnel to sort and match accessories one by one when disassembling the main pump housing for overhaul.

Q: What stable long-term working pressure, maximum continuous rotary linear speed and full high-low temperature operating limit range can this composite integrated oil seal kit withstand to maintain long-term zero main pump hydraulic oil leakage and zero external mine grit acidic rainwater intrusion sealing performance for PC220-11 medium heavy mining excavator main hydraulic pump input shafts?
A: This complete integrated oil seal kit assembly can stably operate long-term under internal main pump housing hydraulic oil pressure of 2.0–3.6MPa, and resist repeated instantaneous peak hydraulic pressure impact up to 6.0MPa generated during excavator full-load heavy rock digging and rapid bucket lifting-lowering cycle operations. The maximum allowable continuous rotary linear speed of the main sealing lip reaches 0.80m/s, fully matching the daily long-time full-load high-pressure pulsation continuous rotation frequency of PC220-11 medium heavy open-pit mining excavator main hydraulic pump input shafts. The overall applicable full working temperature range covers -110°C ~ +222°C, which can meet the ultra-low temperature cold start demand of alpine open-pit mining yards in winter and long-hour continuous high-temperature pump body operation under full heavy digging load in hot summer months. Carbon-graphite blended fiber NBR main lip resists high-pressure main hydraulic oil swelling and thermal oxidation aging, modified HNBR auxiliary seals resist ultra-low temperature embrittlement, double-layer hot-dip galvanized thick steel skeleton avoids coarse grit and acidic rainwater corrosion deformation, hybrid fiber PA66 backup rings prevent permanent lip thermal extrusion damage; all matching accessories jointly resist thermal aging, sharp coarse sand and rock grit abrasion and long-term hydraulic oil erosion after millions of high-pressure pulsation continuous rotary cycles, realizing year-round stable zero main pump hydraulic oil leakage and zero external mine grit acidic water entering the pump piston and bearing inner cavity. The multi-lip layered coarse grit barrier buffer structure can absorb instantaneous hydraulic pressure surge pulses, block tiny metal pump piston and bearing wear debris from scratching the sealing lip surface, and effectively reduce abnormal continuous harsh roaring vibration noise of the main pump assembly, bearing overheating and piston surface deep pitting abrasion faults caused by early seal aging and failure.

6. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More