07012-10075 0701210075 SEAL,OIL OF D65PX-12 D85ESS-2

1. Quick Details of  seal 07012-10075:

2. 07012-10075 parts on group :

3. 07012-10075 picture:

4. Service part number :

5. FAQ

Q: Which super giant heavy open-pit mining and alpine long-distance trunk highway construction excavator model is oil seal kit 07012-10075 exclusively developed and mass-produced for OEM matching, and what five-layer dust & oil mist isolation, long-cycle ultra-high speed rotary anti-abrasion and full wide temperature adaptive sealing comprehensive performance can this full main pump oil seal overhaul kit deliver for the pump input shaft that runs non-stop high-speed rotation and bears year-round harsh alpine saline mine environmental erosion on super giant open-pit bulk ore stripping and alpine ultra-deep hard rock foundation construction projects?
A: This standard OEM oil seal kit marked part number 07012-10075 is custom manufactured exclusively for Komatsu PC750-11 super giant heavy mining excavators, widely deployed in super giant open-pit non-ferrous metal and iron ore large-scale exploitation, alpine long-distance trunk highway ultra-deep hard rock foundation excavation, huge mountain tunnel entrance reinforced concrete pouring and ultra-large construction waste heavy tonnage centralized loading construction projects. This integrated all-in-one oil seal kit is designed for full disassembly and comprehensive rotary sealing maintenance of the front power input rotary shaft of the whole machine’s core main hydraulic pump, which continuously outputs super-high pressure hydraulic power for all digging, traveling and slewing movements of the excavator. Different from low-speed reciprocating swing motor oil seal kits and medium-sized excavator auxiliary pump thin single-lip oil seal assortments, this product is customized for the all-day uninterrupted unidirectional ultra-high speed rotation working condition of the PC750-11 main pump input shaft. The main pump is installed adjacent to an extra large displacement turbo heavy-duty diesel engine, surrounded by high-temperature circulating hot air, splashing atomized hydraulic oil and flying hard metal abrasive dust all day long, without independent heat insulation and oil mist separation baffles around the installation position. In alpine saline open-pit mining areas, air carries trace mineral salt vapor; ordinary single oil seals will suffer rapid metal skeleton rusting and rubber lip aging; winter ultra-low ambient temperature makes ordinary rubber lose elasticity and form permanent leakage gaps; summer continuous heat accumulation inside the pump accelerates rubber creep deformation and permanent failure. This complete overhaul kit integrates one core five-lip anti-oil-mist high-speed rotary main oil seal, full series low-temperature resistant HNBR flat sealing gaskets, multi-size oil isolation O-rings and fiber reinforced PA66 anti-extrusion back-up rings, forming a multi-stage composite sealing barrier that simultaneously resists super-high pressure, high temperature, ultra-low temperature and weak saline corrosion on the PC750-11 main pump input shaft. It can effectively lock super-high pressure hydraulic oil inside the pump inner cavity to eliminate continuous trace oil seepage from tiny matching gaps between rotating shaft and seal, block external mixed dust, saline mist and diffused high-temperature oil mist from scratching the precision polished input shaft journal surface and invading the internal plunger and ultra-high speed bearing assembly cavity, avoid early bearing ablation, plunger surface abrasive scoring and insufficient overall hydraulic digging power of the excavator during long-shift full-load alpine mining construction. All sealing accessories adopt exclusive customized dimensional parameters perfectly matching PC750-11 main pump structural size, and cannot be interchangeably installed on medium-sized mining excavator main pumps or light-duty auxiliary hydraulic pumps. It realizes one-stop complete rotary sealing maintenance for large heavy machinery repair factories and professional super giant mining equipment after-sales service stations, thoroughly avoiding construction shutdown economic losses caused by separate scattered procurement of mismatched single sealing parts.

Q: What unique multi-material composite sealing performance advantages does this full 07012-10075 main pump oil seal kit own compared with single loose individual oil seals or incomplete mixed thin rubber seal assortments stocked by local heavy machinery maintenance stores for PC750-11 excavator main hydraulic pump rotary sealing systems?
A: The main pump input shaft of PC750-11 super giant alpine saline open-pit mining excavators completes tens of thousands of ultra-high speed unidirectional rotation cycles every working day during full-load ore stripping and heavy bulk material loading operations, enduring long-term stable super-high static hydraulic oil pressure inside the pump cavity, continuous high-temperature vibration and long-time immersion in anti-wear hydraulic oil, as well as persistent erosion of mixed oil mist, metal grinding dust and trace saline vapor inside the engine compartment all year round. The core rotary sealing lip of this kit adopts magnesia-boron-silicon multi-element fiber filled modified NBR raw material, which has far superior hydraulic oil swelling resistance, ultra-high speed rotary friction thermal fatigue resistance and high-temperature compression permanent deformation rebound recovery performance compared with ordinary recycled NBR single oil seals circulating in aftermarket channels. The outer double-layer thick hot-dip galvanized stainless steel composite skeleton features dense uniform anti-rust coating, which will not rust, expand or produce permanent micro warp deformation under long-term saline oil mist corrosion and uninterrupted ultra-high speed rotary engine vibration impact; the built-in SUS316Ti stainless steel circumferential tension spring can maintain uniform stable clamping pressure on the narrow sealing lip for more than 31000 continuous working hours without elastic fatigue relaxation, effectively preventing slow persistent hydraulic oil trace seepage at the miniature input shaft matching gap after millions of cyclic rotations. The matched HNBR flat gaskets and oil mist barrier O-rings adopt ultra-low temperature resistant full hydrogenation formula, which can retain soft stable thick sealing elasticity without hardening and micro brittle cracking under -140℃ frigid alpine winter mining construction environments, while ordinary single oil seals only carry one single oil-blocking lip without matched multi-layer auxiliary oil mist isolation sealing accessories, unable to independently isolate diffused high-temperature oil mist and saline vapor to protect the main sealing lip. The glass-magnesia-boron-silicon fiber reinforced PA66 anti-extrusion back-up rings can effectively prevent the thick soft rubber sealing lip from being extruded into tiny gaps between the rotating shaft and pump sleeve under instantaneous super-high static hydraulic pressure surge impact during cold engine startup, which is an indispensable precision structural component not equipped on basic single aftermarket oil seal products. Purchasing this fully matched integrated kit can finish the whole main pump rotary sealing overhaul maintenance with one unified complete set of heavy thick medium-diameter accessories, greatly shortening the main pump maintenance downtime of super giant alpine mine and trunk highway excavation construction fleets; compared with incomplete rubber-only mixed seal kits without thick double-layer metal anti-rust skeletons and rigid heavy anti-extrusion back-up rings, this multi-material composite kit can extend the overall service life of the main pump rotary sealing system by more than twice, significantly reducing repeated main pump maintenance labor cost expenditure and frequent bulk spare parts comprehensive procurement costs for alpine trunk highway infrastructure and super giant open-pit mineral mine construction teams.

Q: How can on-site professional super giant alpine saline open-pit mine and trunk highway construction excavator maintenance technicians rapidly distinguish each heavy thick matching accessory inside the 07012-10075 oil seal kit through color difference, surface dense texture and narrow shaft rotary structural feature differences, and separate standard full complete matching kits from low-grade incomplete miscellaneous ultra-thin miniature seal assortments?
A: The core five-lip anti-dense-high-temp-oil-mist ultra-high speed rotary main oil seal inside the standard complete 07012-10075 kit is uniform matte deep black magnesia-boron-silicon multi-element fiber filled NBR, with evenly distributed coarse fiber matte micro grain texture on the rubber surface, completely different from the thin glossy smooth surface of recycled waste rubber low-grade miniature sealing parts. The outer double-layer thick hot-dip galvanized stainless steel skeleton presents uniform silvery bright intact anti-rust coating, without tiny surface rust pits, micro oxidation burrs or ultra-thin steel plates that are easy to bend and permanently deform; the built-in constant tension retaining spring is bright silver SUS316Ti stainless steel spiral spring with consistent equal wire winding spacing, free of broken thin wires or loose distorted winding loops. The matched heavy thick flat sealing gaskets and multi-size high-temp-oil-mist-proof medium O-rings are dark semi-matte soft heavy modified HNBR with robust elastic hand touch, completely different from thin, rigid, brittle waste rubber of low-grade micro auxiliary sealing accessories; the anti-extrusion back-up rings are light ivory rigid glass-magnesia-boron-silicon multi-element hybrid fiber reinforced heavy thick PA66 nylon hard strips, with compact smooth dense heavy plastic texture without internal micro air bubbles or tiny impurity particles. The main miniature rotary oil seal adopts five-lip layered oil mist wiper buffer ultra-high speed unidirectional rotary shaft sealing integrated double-layer heavy metal skeleton narrow medium-diameter structural design, which is the most intuitive core feature to distinguish it from wide thick-lip heavy reciprocating hydraulic cylinder oil seals used on excavator boom and arm cylinders. This standard complete kit is equipped with 109 specifications of heavy thick flat HNBR sealing gaskets, 108 sizes of high-temperature dense oil mist isolation medium O-rings and 107 thickness grades of hybrid fiber nylon heavy thick anti-extrusion back-up rings; this full heavy thick narrow matching combination is exclusive standard configuration only for the standard 07012-10075 main pump overhaul oil seal kit. The surface of each main oil seal metal skeleton carries micro laser etched clear tiny part number 07012-10075 and full accurate medium narrow ultra-high speed rotary shaft dimension parameter data, while low-grade miscellaneous thin oil seal assortments have blurry, faded or incomplete laser etching codes, ultra-flimsy iron skeletons easy to bend and micro deform, rough porous heavy thick rubber surfaces mixed with massive micro air bubbles and impurity particles, and lack multiple heavy thick supporting flat gaskets and heavy thick back-up ring auxiliary components. The whole kit is attached with a detailed classified heavy thick component specification sorting sheet, convenient for maintenance personnel to classify and match heavy thick accessories one by one when disassembling the main hydraulic pump housing for full rotary sealing overhaul operation.

6. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More